2-kanals SD-afspiller til meddelelser med ekstern styring
AP-10 er en kompakt, to-kanals SD-lydafspiller i halv-rack-format, der understøtter automatiserede afspilningstilstande via GPIO og LAN-baseret Open Sound Control (OSC), hvilket muliggør problemfri integration med eksterne systemer. Den er ideel til meddelelser og lydafspilning i erhvervsbygninger, forlystelsesparker, fritidsanlæg osv.
Offline indholdsstyring med detaljeret afspilningskontrol
Med den gratis software TASCAM Playlist Editor kan du konvertere lydfiler til formater, der er kompatible med AP-10, samt oprette og redigere afspilningslister effektivt. Softwaren tilbyder detaljerede afspilningsindstillinger for hver enkelt lydfil, herunder lydstyrke, afspilningsintervaller, tider for fade-in og fade-out, forsinkelse ved start via trigger samt antal gentagelser og interval mellem disse. Disse fleksible indstillinger gør det muligt at tilpasse afspilningen til de driftsmæssige krav i en lang række forskellige faciliteter og anvendelsesscenarier.
Playback device for announcements relating to security, sales promotion and visitor information
Ideal for use in public facilities, factories, shops, museums, exhibitions, etc.
Playback of up to 250 mono or stereo audio files via contact output through a GPIO port
Control via Open Sound Control (OSC) over a network connection
Five playback modes (Direct, Single by Priority, Interval, Program, Binary)
‘Dual Mono’ playback mode allows different mono files to be played via the left and right channels
Control of external devices such as amplifiers or lights during playback via a contact output
Manual playback via the front panel is possible
SD cards (SD, SDHC, SDXC) used as storage media
Up to six folder levels can be selected as the playback area
EQ (sound adjustment) for the playback and output signals
Selectable level attenuation for the output signal
Balanced (Euroblock) and unbalanced (RCA) audio outputs
Stereo Line input with selectable level and ducking function for mixed output with the playback signal
Selectable fading for the ducking function
Headphones output with level control for monitoring/checking the output
USB-C port for accessing the SD card via a computer
Ethernet port for OSC control (DHCP or manual address assignment)
Editing software for
Converting audio files to the supported file format (WAV, 48 kHz, 24 bit)
Creating playlists for the individual playback modes
Playlists offer the following settings for each audio file:
Playback order
Display name
Playback level
Playback interval
Fade-in/fade-out time
Start delay
Number of repeats
Repeat interval
A–B section
Number of A–B repeats
Delay time for the control output
File type (Poly, Mono)
Power supply via the supplied AC adaptor (TASCAM PS-P1220E) or an external DC power source (LPS standard)
General
Supported media
SD cards (512 MB – 2 GB, Class 10 or higher)
SDHC cards (4–32 GB, Class 10 or higher)
SDXC cards (64–512 GB, Class 10 or higher)
We strongly recommend using media confirmed to work with this product.
File system format
Up to 2 GB
FAT16
More than 2 GB up to 4 GB
FAT32
More than 4 GB
exFAT
Media must be formatted by the AP-10 hardware.
Supported file format
WAV, 48 kHz, 24 bit
Maximum file size
2 GB
Maximum number of files (including folders)
999
Number of audio channels
2 channels (stereo)
1 channel (mono)
Analogue audio inputs and outputs
Analogue output L/R, balanced
Euroblock (balanced) 3.81 mm pitch
Nominal output level
+4 dBu (1.23 Vrms, output attenuation off)
Maximum output level
+24 dBu (12.3 Vrms, output attenuation off)
Output impedance
100 Ω
Analogue output L/R, unbalanced
RCA connectors
Nominal output level
−10 dBV (0.316 Vrms, output attenuation off)
Maximum output level
−6 dBV (2.0 Vrms, output attenuation off)
Output impedance
210 Ω
Analogue input L/R, unbalanced
RCA connectors
Nominal input level
–10 dBV (0.316 Vrms)
Maximum input level
+6 dBV (2.0 Vrms)
Input impedance
≥10 kΩ
Headphones output
6.3-mm standard stereo jack
Maximum output power
20 mW + 20 mW or higher (THD+N 0.1% or less, 32 Ω load)
Recommended headphones impedance
16–600 Ω
(With low-impedance headphones, sufficient volume might not be achieved even if they are in the recommended range.)
Control inputs and outputs
USB port
USB Type-C connector
Standard
USB 2.0 HIGH SPEED (480 Mbit/s)
Device class
Mass Storage Class
Network connector (ETHERNET)
RJ-45
Ethernet standard
100BASE-TX
Recommended cable
Category 5e or better
Transmission protocol
OSC (Open Sound Control)
Port number
5000
GPIO connector
D-sub 25-pin (female, inch-standard, locking screws: No. 4-40 UNC)
Audio performance
Frequency response
20 Hz – 20 kHz, ±1 dB (SD playback to analogue output, JEITA)
Distortion
≤0.008% (SD playback to analogue output, JEITA)
S/N ratio
≥93 dB (SD playback to analogue output, JEITA)
Dynamic range
≥90 dB (SD playback to analogue output, JEITA)
Channel separation
≥90 dB (SD playback to analogue output, 1 kHz sine wave, JEITA)
Power supply and other specifications
Power requirements
Dedicated AC adapter (TASCAM PS-P1220E, included)
External power supply (DC 12–24 V / 1.2 – 2 A)
Power consumption
During operation
4 W
Standby mode
???? W
Default transition time
20 Minutes (Europe)
Note: The device cannot be switched off completely. To disconnect it completely from the mains, unplug the AC adaptor and/or switch off the external power supply (if used).
Dimensions
214 mm × 44 mm × 165 mm (excluding protrusions)
214 mm × 47 mm × 182 mm (overall)
Weight
1.2 kg
Permissible operating temperature range
0–40 °C
Permissible operating humidity range
25–85 %RH (at 32 ºC, without condensation)
Included items
AC adapter (TASCAM PS-P1220E), SD card protector kit, Euroblock plugs (2), Cable bands (3), Owner’s Manual including warranty note, TASCAM ID registration guide
