Kundeservice: +45 43998877
SC SOUND ApS
0
Lynx LM-A4 output modul til Aurora, 4 x monitor out

Lynx LM-A4 output modul til Aurora, 4 x monitor out

5.400,00 DKK (inkl. moms)
LM-A4 4 analog monitor output modul til Aurora
Model/Varenr.: LNX-LM-A4
Leverandør varenr.: LYN-LMA4-RTL
Lagerstatus: Ikke på lager - Forhør om leveringstid
Favoritliste
Inkl. moms

Beskrivelse
LM-A4

The output-only LM-A4 is an excellent companion to the four-channel LM-PRE4 input-only module.
The combination of these two modules allows for the configuration of a lower cost 4-in/4-out Aurora(n) which is ideal for smaller studios and podcasters.

The LM-A24 and LM-A4 are specialty analog modules that provide line-level I/O on TRS connectors. Designed to the same exacting standards Lynx converters are known for, they offer pristine transparency, excellent imaging, and ruler-flat frequency response.

These modules provide an excellent solution for installations requiring a small number of dedicated I/O’s without the requiring an additional break-out cable. They also offer I/O levels up to +24dBu for extended compatibility with other pro studio equipment. An excellent example application is providing separate monitor outputs when other Aurora(n) line outputs are being fed to a summing mixer or to a patchbay for inserts.

The outputs can easily drive powered monitors and offer precise level control via a low-distortion, digitally-controlled analog attenuator. This analog-domain attenuator maintains a high signal-to-noise ratio over the adjustment range. Monitor speaker protection is provided by output anti-pop relays.

Input trims, output levels, signal routing and mixing are easily controlled from the Aurora(n) front panel or using Lynx’s NControl application on any Windows or Mac computer.

These modules are user-installable either in the top position of module 1 or below the LT-USB or LT-TB3. For Dante and ProTools HD connection methods the LM-A24 or LM-A4 must be installed in the top position of module 1.

Line Out (includes D/A Conversion)
THD+N: -108dB @1kHz, -1dBFS, 20kHz filter, +20dBu FS setting
Dynamic range: 120dB, A-weighted, -60dBFS signal method
Frequency response: ±0.025dB, 20–20kHz
Crosstalk: -130dB maximum @ 1kHz, -1dBFS signal
Output level: -71.5dBu to 24dBu, adjustable in 0.5dB increments in the analog domain
Connection: Electronically Balanced TRS

Relaterede produkter

Lynx Dante Lslot Interface Card

Lynx Dante Lslot Interface Card

 Lynx

LNX-LT-DANTE

Dante expansion kort til Aurora og HILO konvertere. Kortet har ekstremt lav latency og understøtter op til 32 kanaler i 96KHz eller 16 kanaler i 192 kHz. Kompatibel med både Mac og Windows.

På lager - kan sendes i dag

8.990,00 DKK

(inkl. moms)
Vis produkt
Lynx ProTools HD2 LSlot Expansion Card

Lynx ProTools HD2 LSlot Expansion Card

 Lynx

LNX-LT-HD2

Lynx ProTools HD2 LSlot Expansion Card
Lynx Studio Technology has announced a revised version of the LT-HD firmware for their Aurora converters. The LT-HD version 10 firmware update for the LT-HD card allows the Aurora 16 and Aurora 8 to emulate the interface characteristics of the Avid HD I/O converter, allowing seamless operation with Avid systems including HDX and HD Native.

På fjernlager levering 8 - 12 dage

3.690,00 DKK

(inkl. moms)
Vis produkt
Lynx ProTools HD LSlot Expansion Card

Lynx ProTools HD LSlot Expansion Card

 Lynx

LNX-LT-HD

Lynx ProTools HD LSlot Expansion Card
Lynx Studio Technology has announced a revised version of the LT-HD firmware for their Aurora converters. The LT-HD version 10 firmware update for the LT-HD card allows the Aurora 16 and Aurora 8 to emulate the interface characteristics of the Avid HD I/O converter, allowing seamless operation with Avid systems including HDX and HD Native.

Ikke på lager - Forhør om leveringstid

1.990,00 DKK

(inkl. moms)
Vis produkt
Lynx ProTools HD LSlot Expansion Card - B-stock

Lynx ProTools HD LSlot Expansion Card - B-stock

 Lynx

LNX-LT-HD-B

Lynx ProTools HD LSlot Expansion Card - B-stock
Lynx Studio Technology has announced a revised version of the LT-HD firmware for their Aurora converters. The LT-HD version 10 firmware update for the LT-HD card allows the Aurora 16 and Aurora 8 to emulate the interface characteristics of the Avid HD I/O converter, allowing seamless operation with Avid systems including HDX and HD Native.

Ikke på lager - Forhør om leveringstid

1.125,00 DKK

(inkl. moms)
Vis produkt
Lynx Thunderbolt 3 Lslot Interface Card

Lynx Thunderbolt 3 Lslot Interface Card

 Lynx

LNX-LT-TB3

Thunderbolt 3 expansion kort til Aurora og HILO konvertere. En enkelt Thunderbolt port kan drive 6 Lynx konvertere og levere op til 192 kanaler i 192 kHz. Kompatibel med både Mac og Windows.

På lager - kan sendes i dag

8.490,00 DKK

(inkl. moms)
Vis produkt
Hurtig levering
Hurtig levering

Dag til dag levering på lagervarer

Kundeservice alle hverdage
Kundeservice alle hverdage

Vores telefoner er åbne mellem 08:00 - 16:00

Gratis support
Gratis support

På alle vores produkter

Sikker betaling
Sikker betaling

Betal med både kreditkort eller Mobilepay